Wooden Loft Product Specifications



Product Specifications





Our (tongue & groove construction)
gives the loft extreme support and stability. End ladders are (notched), screwed and bolted to the bed rails. The loft is assembled with screws and 3/8" carriage bolts, no nails that will come loose over time.

Single and Double Bookshelves are available for all Size Lofts. Lofts are made from kiln-dried unfinished softwood (Spruce) construction grade dimensional lumber, typical of what you would find at a Home Depot, Lowes or local lumber yard. The loft is not made from furniture grade lumber. The legs are 2x6, front rail is 2x6, back rail is 1/2" plywood, ladder rungs are 2x4, safety rail is 3/4"x2-1/4" MDF. (MDF Board)

Four (4) bed slats are provided with each loft.

The loft may be painted, some sanding will be necessary. We do recommend painting the loft as unfinished softwood will absorb moisture and surface cracks will appear over time. Note, the MDF safety rail will not take a stain and if you plan on finishing it it will need to be painted or you may purchase pine safety rails from us.

Note: Mattress are not included in the price, but you may purchase them from us. Most dorm beds can be disassembled and the frame and mattress used on our loft, check with your housing department before ordering.

We recommend using a 1/2" plywood platform instead of a box spring, you will save space and gain more headroom above the bed. Note, we do not supply the plywood platform, this can be purchased and cut to size from any Home Depot, Lowes or local lumber yard. We can sell you additional slats.

Bunk Bed Loft Bed.com
Your Cart
Your Cart: Empty
© 2024 Bunk Bed Loft Bed.com, all rights reserved worldwide.
Credit Card Logo
Kryptronic eCommerce, Copyright 1999-2024 Kryptronic, Inc. - https://kryptronic.com/ [0.010039 / 1.085426]